Feature

●Standard M4 Cable Clamp:Fits standard cables with 4mm thickness, U brackets keep cables neat and aesthetic, providing security. Designed to connect two rope lengths or form an eye or ring on the rope. It is the best way to attach cables and ropes.
●Premium material: made of 304 stainless steel with polished look, no gripping, durable, rust and corrosion resistant, can be installed in outdoor appliances
●Non-slip design: it consists of a U-shaped bolt, a forged saddle and two nuts. The two layers of wire rope ropes are positioned in the U-bolt and secured for a tight connection. Non-slip threads in the middle of the saddle effectively increase friction.
●WIDELY USED Wide application in fixed patio or patio furniture, sailing in the shade, hanging lights for patio strands, hanging false ceilings, safety pipes, anchor pillars, fence gates, clotheslines, hanging clothesline, ground anchors and fitness equipment and much more.
●Easy to Install A wire rope clamp consists of a U-shaped bolt, a forged saddle and two nuts. Insert the two rope layers into the U-shaped screw and lock them into the position. The non-slip line in the middle of the saddle can effectively increase friction.


Description

Features:

Cable clamps made of 304 stainless steel, polished surface, long service life, rust-proof, corrosion resistant. The wire rope is inserted into the U-bolts and secured for a tight connection.

A rope clip consists of a U-shaped bolt, a forged saddle and two nuts. Insert the two rope layers into the U-shaped screw and lock them into the position. The non-slip line in the middle of the saddle can effectively increase friction.

Suitable for protecting patio or patio furniture, clotheslines, hanging awnings, ceilings, safety pipes, square fence gates, hanging clothesline, pasture fence, flags and signs, anchoring equipment, etc.

Specifications:
Material: 304 stainless steel.
Colour: silver.
Surface: glossy.
Size: M4, for rope or cable diameter 4 mm (further size information please refer to the picture).

The correct way to secure the rope clamps is as follows:
1. Wear the first clip at a width of the base from the blind end of the wire rope. The base or saddle must be stretched onto the end of the rope - U-bolt on the short end. Tighten the nuts tightly.
2. Attach the second clip as close to the loop as possible. Tighten the nuts but not tight.
3. Attach the balance of the clips evenly between the first two clips. Tighten all nuts completely. Apply initial load - check the nuts and tighten again.

Package includes:
12 x M4 wire rope clamps.

If you have any questions, please contact us. We will reply to you within 24 hours and provide you with a satisfactory solution.