[Lötdraht 1.0mm & 100g]
[Lötzinn 1.0mm 20g]
[Solder 0.6 Mm | 20 G]
Product specification:
Diameter: 1.0 mm.
Weight: 100 g.
Raw material: tin-copper alloy.
Melting point: 227°C.
Package Content:
1 x solder.
Product details:
Solder is an important part of electrical soldering.
When you solder something, it can be used to supplement the surface and gap of the electronic device with the metal as a filler, and the fixed electronic device becomes the main component of the solder.
Solder of evenly distributed rosin core, good solderability in both electrical conductivity and thermal conductivity, with the solder wire roller design, which improved soldering efficiency, the residue is also very small.
The solder itself melts quickly and can be applied to the required areas. After cooling, a shiny surface is created and the solder joints look great.
Any welding:
Prepare soldering wire and electronic solder.
Contact the soldering iron with solder joint.
Place the solder wire on the solder point when the weld is heated to the temperature that the solder can melt.
When a certain amount of solder has melted, remove the solder.
Remove the electronic soldering iron at an angle of about 45° when the solder point has been completely wetted with solder.