[D3*60°*50L]
[D8*60°*60L]
[D10*60°*75L]
[D4*60°*50L]
[D6*60°*50L]
[D12*60°*75L]
1. The chamfering tool is mainly used for 60° chamfering or taper hole of the workpiece, as well as chamfering the edges and corners of any surface.
2. The 3-flute design can complete the machining of the conical surface at once, which is suitable for processing small cutting quantities.
3. The unique one-piece design makes it easier to fall off the residue created during the cutting process without clogging the tool.
4. Professional chamfering design can engrave and polish the workpiece without unloading.
5. The chamfering cutter is a standard size and can be used as an aluminum copper milling tool and engraving cutter.
Specification:
Item type: chamfer shank cutter
Material: tungsten steel.
Chamfer: 60°.
Application: aluminum and copper milling tools, engraving router bits
Specification:
D12 x 60° x 75L.
Tip diameter: approx. 12 mm / 0.5 inches.
Shaft diameter: approx. 12 mm / 0.5 inches.
Total length: approx. 75 mm / 3 inches.
D10 x 60° x 75L.
Tip diameter: approx. 10 mm / 0.4 inches.
Shaft diameter: approx. 10 mm / 0.4 inches.
Total length: approx. 75 mm / 3 inches.
D8 x 60° x 60 L.
Tip diameter: approx. 8 mm / 0.3 inches.
Shaft diameter: approx. 8 mm / 0.3 inches.
Total length: approx. 60 mm / 2.4 inches.
D6 x 60° x 50L.
Tip diameter: approx. 6 mm / 0.2 inches.
Shaft diameter: approx. 6 mm / 0.2 inches.
Total length: approx. 50 mm / 2 inches.
D4 x 60° x 50 L.
Tip diameter: approx. 4 mm / 0.2 inches.
Shaft diameter: approx. 4 mm / 0.2 inches.
Total length: approx. 50 mm / 2 inches.
D3 x 60° x 50 L.
Tip diameter: approx. 3 mm / 0.1 inches.
Shaft diameter: approx. 3 mm / 0.1 inches.
Total length: approx. 50 mm / 2 inches.
Packing list:
1 x chamfer shank cutter.