Feature

●Use the corner strip cutter to attach a corner strip with a radius of 1/4 inch to your project.
●Adjust the lower radius so that the table top and bearing are flush with the stop.
●Milling one corner, then turn the workpiece around the length and milling the corner again to finish the corner strip. 1/2 inch shaft.


Description

Bit Specifications
Material: carbide tipped.
Number of bits: 1.
Shaft size: 1/2 inch.
Cutting length: 1-1/8 inch.
Cutting depth: 1/4 inch.
Total length: 3-1/8 inches.
Larger diameter: 1 inch.
Radius: 1/4 inch.
Number of flutes: 2.
Stock Specifications
Bearing inner diameter: 3/16 inches.
Bearing outer diameter: 1/2 inch.
Bearing height: 3/16 inches