Feature(may vary by option.)

●High quality: the BrazeTec Degufit 3000 soft solder paste is a mixture of soft solder powder, flux and a binder. It is used like flux and contributes to a high degree of filling of the solder paste and thus to improved strength. 💥
●Best choice – it also prevents overheating of the pipes wheel fittings, as reaching the soldering temperature is clearly visible. As indicated, it must be processed with additional soft solder in any case. 💥
●Complete set – the brush included in the packaging makes it easier to apply the paste to the copper tube and at the same time avoids unwanted skin contact. 💥
●Use: After inserting the pipe end into the fitting, it is heated by means of a burner until a plumb hollow is visible. Then soft solder is added. After soldering, the flux residues must be removed according to DVGW on the outer surfaces by wiping with a damp cloth. 💥
●✅ Tested – The soft solder paste carries the certification mark of the DVGW (DV-0101AU2229) and the quality mark of the Gütegemeinschaft Kupferrohr e.V. 💥

[100 G]




[250 g]





Description

MORE INFORMATION ABOUT THIS PRODUCT

  1. Size : 250g
  2. Colour: grey.
  3. Melting range of the solder: approx. 227 - 310 °C.
  4. Metal content: min. 60% by weight.
  5. Chloride content: max. 9%
  6. Density of the solder: approx. 7.3 g/cm³.
  7. Density of solder paste: approx. 2.4 g/cm³ (20 °C).
  8. Viscosity of the solder paste: 300 - 500 dPa s (Haake Viscotester 02, Sp.2, 20 ± 2 °C).
  9. Flux residue: corrosive; water flushable.
  10. Cleaning agent: water.
  11. DVGW Test. DV-0101AU2229
  12. Standards: alloy no. according to ISO 3677 = Sn97Cu3 (solder); ISO 9454:2016 = type 3.1.1.4 (flux).

BrazeTec Degufit soft solder paste for installation technology.

The kit contains a practical plastic brush (brush holes) for spreading the paste. On the lid of the container there is a special fixing handle in which the brush can be inserted.

Take a look at our offers and discover other products.