[8 R Angle Blades]
Specification:
ARC Comor:R0.1-R1.5
Chamfering Hole Diameter: ≥8mm
Chamfer capability: C0.1-C2
Rotation speed: 30000 rpm.
Working pressure: 0.4-0.6Mpa
Adjustable Depth: 0.1-0.9mm
Chamfer plate thickness: >3mm
Chamfer Range: ≤1.5mm
Air consumption: 0.4 m³/minute.
Use and maintenance tips:
1. Before using the new machine, please inject pneumatic tool oil and inject about 4C.C into the air intake. After continuous use for about 3 hours, about 4C.C is also injected into the air intake.
2. After injecting pneumatic tool oil, let the machine idle for about ten seconds (do not operate) and let the inner parts of the grinder lubricate as a whole before continuing.
3. The maximum processing C angle of this chamfering machine is C0.1-2 (the best effect is C1, C1 to C2 is best to be chamfered twice, so the effect is better.)
4. Angle R is the arc angle of R1.5.
5. Adjusting the scale wheel can adjust the size of the bevel of the cut, but not the angle.
1. Blind spot size = radius of the guide wheel.
2. R diameter larger than the radius of the guide wheel can be chamfered.
3. R diameter larger than the radius of the guide wheel can be chamfered.
4. If the guide wheel of the chamfering machine is 8 mm, the workpiece with an R diameter of more than 4 mm can be chamfered.
5. R diameter smaller than the radius of the guide wheel is a blind spot.
6. If the guide wheel of the chamfering machine is 8 mm, the workpiece is blind in 2 directions at 4 mm.
Package includes:
1 x Mini Chamfering Machine Set