Product set consisting of a cadmium-free high-silver, manganese and nickel alloyed silver solder foil with 49% silver content and a soldering temperature of 690 °C, and a matching boric acid-free flux paste.
Box contents:
Pack of 1 silver solder foil with 49% silver content, dimensions: 0.2 x 20 x 200 mm (= 20 cm). AT: 690°C.
100 g flux paste according to DIN EN 1045: FH 10.
1 x flux brush.
Information brochure "Fundamentals of successful brazing" as a PDF file please request by email after purchase.
Safety data sheet for the product by email on request.
Features and use:
The 49% cadmium-free, silver solder foil is alloyed with manganese and nickel and has particularly good wetting properties on steel and carbide. The soldering foil is suitable for soldering carbide and diamond materials as well as tungsten, tantalum and molybdenum materials. The solder foil has also proven itself for soldering band saw blades.
SUITABLE BASIC MATERIALS
Steels, hard metals, diamond materials (drill bits) tungsten, tantalum and molybdenum materials and connections of the materials mentioned with each other.
Technical values:
Working Temperature: 690°C
Melting range: 680-705°C
Shear strength: 250 - 300 N/mm² (depending on the co-content of the carbide).
Electric Conductivity: 4 sm/mm
Optimal soldering gap: 0.10 - 0.20 mm
If you have any questions about the processing or usability of the product for your soldering work, please send us your questions by email or simply call us. We are happy to help. All information about our products and procedures is based on in-depth application experience. We convey these results in word and written to the best of our conscience, but this does not relieve the consumer from the obligation to independently examine our products and procedures, especially if the application and procedures have not been expressly approved by us in writing.