Feature

●Ball end cutter: cutting radius: 0.5 mm/0.02 inch; cutting diameter: 1 mm/0.04 inch; cutting edge length: 2 mm/0.08 inch; shank diameter: 4 mm/0.16 inch; total length: 50 mm/2 inch; cutting hardness: HRC45.
●Solid Carbide Tool:P05 carbide end mill has high hardness, wear resistance and heat resistance. Carbide material with good milling and cutting performance ensures high working efficiency. Carbide can run at higher speed than high speed steel.
●Wide applications: suitable for milling and cutting carbon steel, malleable iron, alloy steel, stainless steel, etc. for slot and hole processing. Use on CNC machining centres, engraving machines and other high-speed CNC machine tools.
●Features: Ball head teeth, 2-flute design, spiral chip space design for fast and clean chip removal. The sharp cutting edge ensures a smooth cut. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
●[Widely used] Protects against dust, mud or paint drops during home decoration, remodeling, painting and spraying pigments.


Description

Technical data:

Cutting radius: 0.5 mm / 0.02 inches.

Cutting diameter: 1 mm / 0.04 inches.

Cutting groove length: 2 mm / 0.08 inches.

Shaft diameter: 4 mm / 0.16 inches.

Total length: 50 mm / 2 inches.

Material: solid carbide (P05 carbide).

Surface: AlTiSin coated.

Cutting hardness: HRC45.

Number of grooves: 2 grooves.

End cut type: ball head.

Package Content:1pc x Ball End Mill

Descriptions:

P05 carbide ball end mill has a high hardness, wear resistance and heat resistance. Carbide material with good milling and cutting performance ensures high work efficiency. Carbide can run at higher speed than at high speed steel.

Suitable for milling and cutting carbon steel, malleable iron, alloy steel, stainless steel, etc. For slot and hole processing. Use on CNC machining centres, engraving machines and other high-speed CNC machine tools.

Equipped with ball head cut, 2-cutting design spiral chip space design for fast and low chip removal. The sharp cutting edge ensures a smooth cut. The AlTiSin composite coating has a high hardness, high wear resistance and high thermal stability.

The longer the tool clamped by the chuck, the better. If the clamping length is shorter, you need to reduce the feed and cutting speed to reduce vibration and extend the tool life.

Tips: In combination with the material to be machined, choose a suitable feed and cutting speed to improve the tool life and achieve better machining accuracy and performance.