915MHz ESP32 LoRa V3 Development Board
Special features:
- Microprocessor: ESP32-S3FN8 (Xtensa (R) 32-bit LX7 dual-core processor, five-stage pipeline rack structure, frequency up to 240 MHz)
- SX1262 LoRa Node Chip
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding and other protective measures.
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery current detection, USB/battery power automatic switching)
- Built-in Wi-Fi, LoRa, Blue-tooth three network connections, Onboard Wi-Fi, Blue-tooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use.
- Onboard 0.96 inch 128 x 64 dot matrix OLED display can be used to display debugging information, battery power and other information.
- Built-in CP2102 USB to serial port chip, convenient for downloading programs and debugging information prints.
- Supports Arduino development environment.
- This is a standard LoRaWAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol. A unique license is required to run this code.
- With good RF circuit design and low power design.
915 MHz LoRa Antenna 5DBi SMA Connector with U.FL/IPEX to SMA Connection Cable
Frequency: 915MHz
Gain: 5dBi
VSWR: <1.5
Impedance: 50Ω.
Antenna length: 19.5 cm.
Antenna Connector: SMA Male
U.FL/IPEX to SMA Male Cable Length: 10cm
Package includes:
2 x ESP32 Lora V3 OLED Development Board
2 x JST 1.25mm 2P Male
2.54 pin (no soldering, soldering required)
2 x 915MHz LoRa Antenna with U.FL/IPEX to SMA Connection Cable