Feature(may vary by option.)

●Small (48 mm x 18 mm), robust and powerful board based on the ATMega4809 AVR processor
●Clock 20MHz, Flash 48KB, SRAM 6KB, EEPROM 256byte.
●Two 15 pin connectors (one on each side) that are male to male compatible with the original Arduino Nano.
●The power supply architecture based on a highly efficient DC-DC converter allows the board to be powered up to 21V and control output peripherals up to 950mA without overheating.
●Start in minutes with thousands of patterns available as open source.

[3 Boards Pack]

[Single Board]

[6 Boards Pack]

Description

The tiny size of the Arduino Nano Every (48 x 18 mm) makes it ideal for wearable projects; in experiments, in prototypes or in a full cosplay setup! Sensors and motors can be connected without much effort, which means it is also suitable for robotics, drones and 3D printing. It can be flexibly adapted to the requirements of your design and can be used as a perforated grid board when assembling connectors or soldered directly to a PCB thanks to its tin shaped pads as SMT. The Configurable Custom Logic (CCL) is a great way to get beginners more interested in hardware. We have used a high quality USB chip so that people have no connection or driver problems. The separate SAMD11 ARM Cortex M0+ processor that handles the USB interface also allows to implement different USB classes such as Human Interface Device (HID) instead of the classic CDC/UART.