[RP2040-PiZero Development Board]
[Pico W with pre-soldered pin header]
Board Specifications
Based on Raspberry Pi Pico, Raspberry Pi Pico W board with pre-soldered header comes with a wireless communication module. The wireless module hardware uses Infineons CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4GHz band, making it the perfect solution for wireless network control and communication.
Key Features:
RP2040 microcontroller chip designed by Raspberry Pi in the UK.
Dual-core arm Cortex M0+ processor, flexible clock up to 133 MHz
Onboard Infineon CYW43439 Wireless Chip Support 2.4GHz Wi-Fi 4
264 KB SRAM and 2 MB built-in flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Energy-saving sleep and sleep mode.
Drag and drop programming with mass storage via USB
26 x Multifunctional GPIO Pins
2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels.
Accurate clock and timer on chip
Temperature sensor.
Accelerated floating point libraries on the chip
8 x Programmable I/O (PIO) State Machines for Custom Peripherals
Package includes:
Raspberry Pi Pico W board with pre-soldered header x1
1 x 3 Pin Yellow Pin Header
1 x USB Type A to Micro Cable