[1]
[3]
[5]
AZDelivery LM2596S DC-DC Power Supply Adapter Step Down Module
Technical details:
✔️Input voltage: 4.5-35V.
✔️Output voltage (adjustable): 4-34V.
✔️Output current: 2A, short-term to 3A (max).
✔️Size: 45mm x 20mm x 15mm / approx. 3 g.
✔️Solder terminals pin definition: input to IN+ IN/output to OUT+ OUT-
✔️Permitted Ambient temperature: -45°C to +85°C.
✔️Switching frequency approx. 150 kHz.
✔️Dynamic response speed 5% 200uS
Application:
Do you want to power your 3.3V powered controller mobile, for example with a 9V block battery? No problem if you put the AZDelivery Step-Down Voltage Converter LM2596 in between. With less than 8% loss, this converter is very efficient and often saves the different energy sources to power your devices. Simply and analogously determine the desired output voltage via the rotary resistance. Please note that this must be at least 2 V lower than the incoming voltage. For currents of over 1 A at the output or 10 V voltage difference, we recommend the use of a heat sink. These are also available from AZDelivery.
The advantage of an LM2596S switching regulator is that the efficiency is very high. Example: the board is powered by 20 volts, the output voltage has been set to 12 volts, the load at the output is 1A. The current consumption on the 20 V side is then approx. 12V/20V/0.92 = 0.65A.