Feature

●Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
●Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory.Type-C connector, keeps it up to date, easier to use
●Onboard 1.28 inch capacitive touch display, 240 x 240 resolution, 65K colour. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture.
●Onboard 3.7V lithium battery recharge/discharge header and 6 × GPIO pins via SH1.0 connector.
●Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions


Description

ESP32-S3 Development Board, With 1.28 inch Round Touch LCD, Compact Size, Accelerometer And Gyroscope Sensor

Features:
ESP32-S3 Touch LCD 1.28 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28 inch capacitive touch display,
Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it
into products quickly.

ESP32-S3-Touch LCD 1.28
Embedded GC9A01 display driver and CST816S capacitive touch control chip.
2. Small size, touch more possibilities.
Suitable For Various Smart Devices Development, Can Realize Human-Computer Interaction Function

Whats On Board
ESP32-S3R2.
The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 2MB PSRAM
2.W25Q128JVSIQ
16 MB NOR flash.
3.CH343P
USB to UART chip
4.ME6217C33M5G.
800mA output, low dropout, high rejection rate
5. ETA6096.
High-efficiency lithium battery recharge manager.
6.QMI8658
6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.
7. MX1.25 battery header.
MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging
8. USB Type-C connector.
Supports USB 1.1 hosts and slave devices.
9. Reset button.
10. Boot button.
Press it before resetting to enter download mode

Development Resources
https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28?Amazon

Package contents:
ESP32-S3-Touch LCD 1.28 x1