Feature(may vary by option.)

●Display 20 characters including letter, number and symbol in 4 lines on a large screen
●Working voltage: 5 V; Contrast adjustable with a 50 K potentiometer onside
●Bright backlight, displaying characters clearly
●Module dimensions: 97 x 59 x 12 mm; Viewing area size: 71 x 21 mm
●Compatible with Arduino and other micro-controllers

[IIC 1602LCD]

[2004LCD*2]

[1602LCD*2]

[IIC 2004LCD]

Description

Introduction
LCD2004 display is a dot matrix module designed to display 20 characters including letter, number, and symbol, supporting 4-bit and 8-bit data transmission mode.
Its quite convenient for beginners to call the built-in library Liquid Crystal of Arduino IDE, no need to edit yourself.

Working voltage: 5V; Contrast adjustable with a 50K potentiometer onside. To use the 3.3V backlight, just connect pin A to 3.3V, pin K to GND.

Solder the pin headers on it before using.

Pins Function
VSS: Connected to ground.
VDD: Connected to a +5V power supply.
VO: To adjust the contrast.
RS: A register select pin that controls where in the LCDs memory you are writing data to. You can select either the data register, which holds what goes on the screen, or an instruction register, which is where the LCDs controller looks for instructions on what to do next.
R/W: A Read/Write pin to select between reading and writing mode
E: An enabling pin that, when low-level energy is supplied, causes the LDC module to execute relevant instructions.
D0-D7: To read and write data.
A and K: Pins that control the LCD backlight.

For more details, please click:
http://wiki.sunfounder.cc/index.php?title=LCD2004_Module

Package includes:
- 2 x LCD2004.
- 2 x 16 pin headers