Feature

●This PVC & PU repair kit is our basic plastic repair kit for your minor repairs/bonding.
●Suitable for repair/bonding items made of soft PVC, faux leather and PU (polyurethane) as well as for fabric and fabric surfaces made of vinyl, polyester and nylon.
●For example, for inflatable boats, waders, boots, swimming pools, PVC pools. Water toys, rainwear, umbrellas, awnings, sleeping mats, air mattresses, tarpaulins, tents, etc. Detailed instructions for use in German can be found on the bottom of the plastic box.
●The PVC and PU repair kit comes in a sturdy resealable plastic box and contains: 1 tube of special adhesive 6 g, 2 transparent round patches diameter 45 mm approx. 0.4 mm thick, 2 transparent patches 75 x 40 mm approx. 0.4 mm thick, 1 rough paper approx. 30 40 mm and 2 brushes. The item is made in Germany
●Please note: This repair kit is not suitable for rubber repairs
●Storage: The optimal storage is dark, cool (15-25 °C) and dry. Shelf life of the patches and unopened adhesive: if the recommended storage conditions are observed, the repair kit can be stored for many years without quality restrictions.
●Repairs and bonding with the fishingglue.de PVC and PU repair materials can withstand up to a temperature of 60 °C.


Description

PVC & PU Repair Kit

This PVC & PU repair kit is our "small" universal PVC and PU repair kit with 4 patches. Ideal for quick and easy repair/bonding of articles made of soft PVC and PU (polyurethane) as well as for fabric and fabric surfaces made of vinyl, polyester and nylon. For example, for inflatable boats, waders, boots, swimming pools, PVC pools. Water toys, rainwear, umbrellas, awnings, sleeping mats, air mattresses, tarpaulins, tents, etc. Please note: Not suitable for rubber repairs.

Instructions for use:
Application for items made of PVC, with PVC surface, PU and faux leather:
Slightly roughen the area to be repaired with the rough paper (slightly larger than the patch). Then apply the adhesive to the roughened surface and on the patches and spread evenly thinly with the brush. Leave the adhesive to work for 1 - maximum 2 minutes. Place the patch and press firmly from the centre outwards and leave under pressure for at least 5 minutes. The glued area is then easily resilient. The repair is fully resilient after approx. 2-3 hours.

Instructions for use on articles made of fabric and with fabric surface:
Slightly roughen the area to be repaired with the rough paper (slightly larger than the patch). Apply a sufficient amount of glue to the roughened area and spread with the brush, massage in and approx. Leave to work for 20-30 minutes. Then the 2nd Adhesive coating on the 1st Apply the coat and patch and spread evenly with the brush. Then leave the adhesive to work for 1-maximum 2 minutes. Place the patch on and press firmly from the centre to the outside and at least Leave under pressure for 5 minutes. The glued area is then easily resilient. The repair is fully resilient after approx. 2-3 hours.
Avoid direct sunlight during every repair/gluing.