Feature(may vary by option.)
●Ideal for use with EDELRID safety devices.●Wire bracket holds the carabiner in place when secured, avoiding unfavourable transverse loads●Breaking load kN: 25/9/9●Keylock closure for optimal handling when attaching and unhooking●H-profile construction for the best possible material utilization with minimal weight[Icemint]
![](https://m.media-amazon.com/images/I/41IcvzuqwiL._AC_.jpg)
[Oasis]
Description
- Innovative and robust HMS carabiner with steel insert in the crown and integrated wire bracket for protection against twisting. Maximum load longitudinal 2.5 t (2500 kg).
- An HMS carabiner is suitable for securing with the half-mast knot - therefore also the name HMS. The HMS carabiners always have a lock lock (manual or automatic) to prevent unwanted opening of the carabiner snap when securing. Ideal for use with Edelrid safety devices.
- Keylock closure for optimal handling when attaching and unhooking. With the Keylock system, the nose is replaced with a T piece, in which the corresponding milled snap snaps into it. This creates a significant advantage in handling, as cord wires, wires or tape material cannot get caught. Wire bracket keeps the carabiner in place when securing, unfavourable cross loads are thus avoided. H-profile construction for best possible material use with minimal weight. Steel insert prevents premature wear due to rope friction or drill hook tabs.
- The Triple Lock carabiner requires three movements to open it. One-handed operation is quite difficult and requires some exercise.
- Breaking load: 25 kN longitudinal / 9 kN across / 9 kN open o Weight: 91 g