●Tubeless tape: PMP tubeless tape is perfect for sticking a tubeless ready wheel. Choose the size based on the channel width of your rims. ●Compatibility: This tape roll is 23 mm wide and ideal for rims with channel widths between 19 and 22 mm. One roll is enough to completely seal two wheels with a diameter of up to 29 inches. ●Recommended applications: the 23 mm wide tubeless tape is ideal for road bikes, road bikes, mountain bikes and generally for all bikes in this width range. ●Tape installation: remove the tyre, place the rim upright and attach the tape 10 cm before the valve hole matches. Start sticking the tape to the circle and make sure that the tape does not overlap (pull firmly on the tape and do not worry if it stretches, in this way it has a better seal! ). ●Installation of the valve: After you have glued the tape to the rim, you only need to drill a hole in the valve with a small awl. Do not make a hole larger than the valve body, otherwise there is a risk of the tubeless system not working: it is better to have a smaller hole, which is then directly enlarged by the valve itself. Finally, insert the valve and you can make your bike tubeless
[27 mm (per cerchi 23-26 mm) Rolle 50 Meter]
[23 mm (für Felgen von 19 bis 22 mm) 5 Meter rollen]
[27 mm (für Felgen von 23 bis 27 mm) 5 Meter rollen]
[38 mm (für Felgen von 34 bis 40 mm) 5 Meter rollen]
[31 mm (per cerchi 27-30 mm) Rolle 50 Meter]
Description
Compatibility:
PMP Tubeless Tape is perfect for sticking on a Tubeless Ready Wheel. Choose the size based on the channel width of your rims. One roll is enough to completely glue two wheels with a diameter of up to 29 inches.
Rim tape 23 mm: Ideal for rims with a channel width between 19 mm and 22 mm. Rim tape 27 mm: Ideal for rims with a channel width between 23 mm and 26 mm. Rim tape 31 mm: Ideal for rims with a channel width between 27 mm and 30 mm
Tape installation
Remove the tyre, set the rim. Attach the tape 10 cm before the valve hole matches. Start to stick the tape on the circle, make sure that the tape does not overlap (tighten the tape and do not worry if it stretches. This way it holds better. A small awl drill a hole in the valve. Finally, insert the valve and you can make your wheel tubeless
The Tubeless PMP range
Tubeless Plus VT + valves with anti-clogging system, fluid control and simplified bead tubeless MTB valves in CNC Ergal Presta type, with oversized ring nut, anodised colour, tubeless valves for road bike in CNC ergal, Presta type, with oversized ring nut, anodised colour, orange latex liquid sealant for MTB and road tyres, tubeless tape