Feature(may vary by option.)

●🌟 The soldering wicks can be used to correct errors with small boards on circuit boards, remove relays and other components from circuit boards, to solder mechanical keyboard switches, to de-solder old wires from devices, to clean computer parts such as a motherboard, alloy on SMD components and more
●1 x non-clean solder wicks, each wick is approx. 3 m long and 0.3 cm wide, enough quantity and length to meet your daily needs
●This desoldering wick has geometric precise weaving with copper and rosin, working from the tip of the desoldering wick, once the desoldering wick and solder has been heated, the soldering braid can quickly absorb melted solder and leave a clean working area.
●🌟 The desoldering wicks are made of good quality copper wires, precise weaving design can improve capillary effect and increase the superfluous soldering absorption
●🌟 The braided soldering wicks are suitable for laboratories, home and industrial welding work, practical tools for removing soldering and correcting errors on small circuit boards and brings a lot of comfort to your work

[3]




[5]





Description

➤Specification:
Width: 0.3 cm, Length: 3 m.
Nice performance:
The braided soldering wicks can improve the capillary effect and superfluous solder absorption ability, increase your efficiency, they will leave only small residue after use, and the residue is non-conductive and non-corrosive, you dont need to spend time removing them from the boards.
➤ Wide application: the desoldering wicks are suitable for laboratory, home and industrial welding work, practical tools for removing soldering and correcting errors on small circuit boards, clean small components, suitable for resoldering and desoldering, easy to use and no B DPof of the PPPLatine.
➤ How to use the soldering wick:
Step 1:Place the wick over the solder you need to remove, and then simply press the heated soldering iron tip on the wick.
Step 2: Remove the wick once the solder has been absorbed.
Step 3: Cut off the used part of the wick.
Step 4: Repeat this process if necessary.