[A Type With Motor]

[C Type With Motor]

[Buck Converter]

[B Type With Motor]

1 x simulation boat resin dynamic rotating radar devices powered working radar rod kit with 1.5 V-1.8 V motor for DIY model ship parts.
Note: For different engine batches, the cable color is different. Sometimes the motor cable is a red + black cable, sometimes it is a red + blue cable. This does not affect performance. The red cable is positive, the black or blue cable is negative.
Description:
- Item name: Simulation dynamic radar model.
- Processing technology: light-curing printing
- Material: photosensitive resin.
- Quantity: 1 piece.
- Used for 1:25 model boat yacht bulk carrier
- Basic reservation: 6 mm diameter gear motor can be installed
- Motor supply voltage: 1.5V-1.8V
Specification:
Type A 43.2 x 80 mm.
- Base: height 43.2 mm.
- Shake rod length: 80 mm.
- Weight: 5 g (with motor 6.9 g).
Type B 39.4 x 60 mm.
- Base: height 39.4 mm.
- Shake rod length: 60 mm.
- Weight: 5.2 g (with motor 7 g).
Type C 25.3 x 60 mm.
- Base: height 25.3 mm.
- Shake rod length: 60 mm.
- Weight: 4 g (with motor 5.8 g).
Step-down converter:
- Size: 20 x 30 mm.
- Input voltage: 5V-15V.
- Output voltage: 1.25V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, standard 1.25V
- Output current: 3A.
- Weight: approx. 4.3 g/piece.
Note:
- The radar must be assembled by yourself.
- No need to apply glue when assembling the vibrating rod. If necessary, please check the amount of glue to prevent the motor output shaft from being soaked with glue and can no longer rotate.
- Please allow slight measurement deviation due to manual measurement.
- Due to unavoidable factors such as monitor, shooting angle, light source, etc., the color of the picture may have a very slight color difference from the goods you receive. Everything depends on the goods you are