Feature(may vary by option.)
●Turn off the network switch during installation or remotely to avoid electric shock.
●Chimney fan chamber diameter 13.5-21cm/17-24cm The input voltage is 220 V (voltage from 110 V - 120 V, we are equipped with a voltage converter). The chimney extractor fan is used by connecting two wire ends to the power source.
●Easy to install, very quiet, suitable for most fireplace shapes, installation does not require professional technicians.
●Thank you for your purchase, if you have any questions, please leave a message, I will reply you in time.
[13.5~21 Cm]
Description
Voltage: 220V (voltage 110V-1220V, we are equipped with a voltage converter).
Power: 100W
Size: base diameter 13.5\u201321cm/17\u201324cm
Color: as picture show
Product weight: 2.5 kg.
Note:
1. The household fireplace adopts a suction fan and the output temperature should not exceed 60 degrees. Otherwise, the suction ceremony will be damaged. Install the power cord with at least 0.5 square copper wire.
2. Turn off the network switch when installing or removing to avoid electric shock.
3. The smoke vent interface must be attached with waterproof insulation tape.
4. The installation at the chimney interface must be firm and the interface must be tightly integrated into the chimney to achieve the best effect.
5. When the suction meter is standing, you need to pay attention to the smoke flow and smoke outlet.
6. The flue is placed on the chimney. The smoke vent should be more than 6 metres away from the fitting, otherwise the suction fan will burn. The temperature of the fireplace cannot burn the insulation layer of the network cable.
Package includes:
1 x suction fan