Feature

●Note: This adapter can only be used with our 425 g Bluecraft cylinders
●Freedom: decide for yourself which CO2 cyinder you want to use on your soda carbonator.
●Simple: please note the description – with just one hand your CO2 aerator is ready for use with this quick adapter.
●Economical: we also offer filled Bluecraft cylinders and fillings
●Please note: Unfortunately, there are copies of this adapter on Amazon. Our adapter weighs 131 g and the copy only 43 g


Description

CO2 cylinder 425g adapter quick connect pink sodastream universal aluminium duo terra art crystal gaiaCO2 cylinder 425g adapter quick connect pink sodastream universal aluminium duo terra art crystal gaia

Please note: Unfortunately, there are China copies of this adapter. Our adapter weighs 131 g and the copy only 44 g.

With the adapter for the Sodastream DUO, Art, Terra, Gaia and Crystal 3.0 aerator, you can easily and easily use the CO2 cylinders from Bluecraft on the new water carbonator and start bubbling.

You can swap your empty cylinders smartly on co2-kaufen.de.

With just one step, your CO2 aerator is ready for use with the Quick Connect adapter.

Not suitable for plate valves

How to use your Quick Adapter

sodastream duo sodastream duo

Sodastream GaiaSodastream Gaia

Sodastream TerraSodastream Terra

Sodastream Art Crystal 3.0Sodastream Art Crystal 3.0

Model DUO

Turn the device upside down. At the bottom of the device there is a semi-circular thin plastic bridge (marked pink in the picture). With small household pliers, the bridge is carefully separated. Then set up the device again.

Model Gaia

Open the housing flap of the aerator and remove the base plate by pressing down the central lock.

Model Terra

Open the housing flap of the aerator and remove the pink base plate by pressing in the two locks.

Model Art and Crystal 3.0

Open the housing flap of the aerator and remove the base plate through a 60 mm diameter hole drill.

Then finish the installation with the following steps:

Now screw the Quick Connect adapter (clockwise) firmly onto the carbonic acid cylinder. Remove the housing flap of the bubble device and tilt or lift the device slightly backwards. First, insert the lower end of the cylinder into the device and then insert the cylinder head into the pink cylinder holder. Make sure that the screw head on the valve points to you. Now press the pink cylinder lever down. Place the device straight on the table again. Replace the case flap.

Your Bluecraft CO2 cylinder is now ready to bubble.

Looking for specific info?