Feature
●The construction of the TFV 20 is designed for maximum flexibility in harsh operating conditions. Therefore, inside the extremely robust plastic housing, a two-flow centrifugal fan with extra large special shaft and complete metal encapsulation of the motor works to protect against dust and dirt.
●The controls are also protected and therefore safe from impact damage. In addition to the two-stage power switch and a MID-compliant* dual meter for operating hours and energy consumption, the control panel also houses a service socket for direct connection of another turbo fan or dehumidifier.
●Integrated stop buffers allow space-saving form-fitting stacking of multiple devices during transport and storage. When using ventilation on site, the turbo fan equipped with carrying handle rod can be used variably in three installation positions: horizontal, at 45° tilt or vertical. In this way, many different ventilation scenarios can be realized, whereby the stand runners of the TFV 20 ensure a stable stand in any installation position.
●The air outlet duct of the TFV 20 has been designed by our flow technicians to generate a wide floor-level airflow over wet floor coverings or damp screeds, so that the room air is optimally distributed and thus the drying speed noticeably increased - ideal for carpet drying, for example.
●Wherever you need to circulate large amounts of air, the TFV 20 makes it highly pressured, energy-efficient and reliable. From construction drying acceleration to cavity ventilation to drying support during water damage rehabilitation, the TFV 20 is the optimal turbo fan solution
Description
The TFV 20 shows its best side at every requirement
Integrated stop buffers allow for space-saving, form-fitting stacking of multiple devices during transport and storage. When using ventilation on site, the turbo fan equipped with carry handle can be used variably in three installation positions: Horizontal, 45° tilt or vertical. In this way, many different ventilation scenarios can be realised, whereby the circumferential, non-slip runners of the TFV 20 ensure stable stand in any installation position.
For targeted point ventilation, an optional hose distributor with connection option for two fan hoses with a total length of up to 40 metres is also available.
The air outlet channel of the TFV 20 has been designed by our flow technicians in such a way that it generates a wide ground air flow over wet floor coverings or damp screeds, so that the room air is optimally distributed and thus the drying speed is noticeably increased – ideal for carpet drying.
Wherever you need to circulate large amounts of air, the TFV 20 is powerful, energy efficient and reliable. From building drying acceleration to cavity ventilation to drying support in water damage renovation, the TFV 20 is the optimal turbo fan solution
The TFV 20 is a strikingly good solution for large volume air circulation in many professional tasks.
Practical advantages:
Development, design, production: 100% Trotec, as robust and lightweight construction, two-flooded radial fan with extra large special shaft, all-round, non-slip floor blades, two-stage blower operation and storage in multiple angle positions possible, high energy efficiency, therefore equally powerful and energy-saving, robust, dense metal trim of the motor to protect against penetrating dust, MID-compliant, dual meter for operation. hour and energy consumption Protection-recessed control panel
Technical data:
Air flow: 1185 m³/hAir pressure max. : 390 PaMax. Pump temperature: 60°CInput voltage: 230 V / 50 Hz (0.5 A). Power connection: Schuko / CEE 7/7 cable length: 5 m. Dimensions (L x W x H): 343 x 335 x 355 mm. Weight: 12 kg. Protection class: IP 22