[Woods]
Specification:
Condition: 100% Brand New
Item type: N?hahle
Material: beech wood and metal.
Weight: approx. 81 g - 107 g / 2.9 oz - 3.8 oz.
Installation
1. Remove the 2 cone needles.
2. Install the cone needle.
3. F¨¹hren Sie den Faden durch das konische Loch
4. Install the head.
5. The thread length is slightly longer than the seam
6. The cone needle goes through the front of the leather
7. Ziehen Sie den Faden heraus, w?hrend Sie die Konusnadel nach hinten herausziehen
8. The cone needle goes through the second hole
9. Run the cord through the hole in the picture.
10. Tighten the thread at one end and pull out the cone needle at the same time
11. As shown on the back
12. F?deln Sie weiter wie im Bild gezeigt
Use:
1. Disassemble the stapling tool first.
2. After sharing
3. Insert the needle upside down
4. After threading, the needle is pulled out from above
5. Install the roller.
6. Finish
N?hen:
1. Go straight ahead
2. Pull out the lead.
3. Through the second hole
4. Pay attention to threading, go through here
5. Pull the needle out of the insertion position
6. Tighten both sides at the same time.
7. Repeat the above 6 steps, the final effect is as shown above.
Package list:
1 x N?hahle
2 x straight needles.
1 x small screw wrench.
1 x user manual (English language
or
1 x N?hahle
1 x straight needle.
1 x elbow needle.
1 x screw mounting head.
1 x user manual (English language
Note:
1. Please allow a 0-1 inch error due to manual measurement. Thank you for your understanding.
2. Monitors are calibrated differently, the colour of the item shown in the photos may differ slightly from the real object. Please take the real one as standard.