Feature

●This acrylic crochet knife tool is specially used for cutting acrylic sheets or other plastic sheets. Acrylic sheets or other plastic films are hard and brittle, so they are difficult to split. This hook knife can help you form a thin groove on the acrylic plate, then you can break the acrylic plate along the groove.
●1. Please mark the board with a pen and then use a ruler to place it according to the brand. 2. Use the hook knife to draw a groove on the acrylic plate along the ruler, and the ruler should be pressed with your left hand. . Hold the hook knife with your right hand and repeat the process to make the groove deep enough.
●1. There is a comb-shaped protrusion on the back of the hook knife. Place the hook knife under the acrylic plate, align the protrusion of the hook knife with the straight hooked groove and press both sides of the groove with both hands. Allow a small part of the acrylic plate to split along the groove. 2. Break off the acrylic plate completely along the groove.
●When using the hook knife, make sure to protect the knife tip and not touch the floor. If the tip of the knife is not sharp, you can change the blade. Includes a hook knife with 1 blade and a box of blades. There are a total of 11 blades.
●Includes a hook knife with 1 blade and a box of blades. There are a total of 11 blades.


Description

Hook knife for cutting acrylic plexiglass panels, with curved handle, more convenient to use. One handle, 11 blades. It can be used to divide a 0.4 inch thick acrylic plate, but it is better to use a mechanical cut-out for acrylic plate, which is more than 0.4 inches thick. Cutting acrylic sheets is difficult, before you start cutting, please read the description or instruction video carefully. When cutting, you can press the ruler with your left hand to prevent the ruler from moving, but the hand strength is limited, so professionals usually walk on the ruler with their feet when cutting acrylic. If possible, it is recommended to place the foot on the ruler before cutting.