Ecotex water-based inks are ready to use. Ecotex water-based inks can also be used as a discharge ink by simply mixing into the discharge activator - included in this kit. The inks are bright and vibrant. By using Ecotex water-based inks, you can print with high stitch density that produces high image detail. Water-based ink creates an extremely soft feel on your garment.
Network Policy: 160-305
Cure: should be at least 90 seconds at 160 °C. For best results 2-3 minutes at 160°C. Flashing: Flashing at 105°C/220°F - 7-12 seconds Recommended cleaning: on the press/in the sink - water based screen cleaner.
For optimal use: activate just enough ink for the job at hand. Mist the screen with water at high volume to prevent ink drying out.
Mixing information:
WATER BASED PRINTING Our ink can be used straight from the bottle as a traditional water based ink. We recommend performing this technique only on light garments. Discharge Pressure This ink can also be used as a discharge ink by adding the discharge powder. When used as a discharge ink, apply sufficient discharge powder to the amount of ink you need for the print runtime. This is between 3-5% of the weight. Mix thoroughly to ensure no chunks or grains are visible. Once the powder has been added to the ink, it will last for an hour.
Emulsion recommendations We recommend using a water-resistant emulsion such as WR-Blue or DC Pink, both require a mixed diazo. Remember to degrease your screen before coating, Hyper Haze degreases and removes stains/ghosts.
GENERAL TESTING Before making a large print, we recommend doing a stretch and wash test to ensure you have cured and printed correctly before going into production. Increase curing time if testing is missing. We recommend using only natural fibres, best results will be seen on 100% cotton. Synthetic fibres are not discharged properly.
Color Matc