Compatible with:
Fits 20lb CGA320 CO2 tank, with thread, up to 5lb CGA320 CO2 tank with thread.
How to Refill 5lb CO2 Tank of 20lb CO2 Tank:
1. Cool the 5lb CO2 tank (some customers put it in the freezer overnight).
2. Heat a 9 kg CO2 tank (leave it for approx. 2 hours of direct sunlight).
3. Connect the 20lb and 5lb tanks to the transmission hose, with the needle valve closest to the 5lb tank (tighten with a 12" adjustable wrench). Dont forget the seals on both ends.
4. Wear a good pair of gloves, open the valve on the 20lb tank and make sure there are no leaks.
5. Turn your 20lb tank upside down (most standard tanks do not have an internal immersion tube).
Fold over allows the transfer of the liquid CO2 we want, when you turn the supply cylinder upside down, make sure it is safe and does not tip over).
6. Open the bleed screw on the hose until the liquid leaks, then close it (this cleans the air from the hose).
7. Slowly open the valve on the 5lb tank and listen that the tank does not last very long.
8. Close the valves on both tanks
9. Open the bleed screw to empty the hose and then close it
10. Use a wrench to loosen the nuts from both tanks and then turn by hand.
11. Done.
Box contents:
1 x hose adapter, 2 x seal, 1 x user manual (may not be in English). not in English).
Customer service:
The products are 100% professionally tested before leaving the factory.
If you have any questions, please feel free to email
We will solve your problem as soon as possible.