Feature(may vary by option.)
●The cleaner dissolves and removes all soot residues and dirt in the particulate filter/catalytic converter without disassembly
●Performance losses or interference caused by dirty particulate filters/catalysts are eliminated without leaving any residue
●Cleaning restores the function of the DPF/CAT
●The product is also ideal for EGR valve cleaning. The EGR valve must be cleaned when removed
●If the DPF is too clogged for too long a time, only thermal/mechanical cleaning helps with the specialists
[1]
[2]
[4]
[6]
Description
The cleaner dissolves and removes all soot residues and dirt in the particulate filter/catalytic converter without disassembly. loss of performance or interference caused by dirty particulate filters/catalytic converters are removed without leaving any residue.
Cleaning restores the full function of the DPF/CAT. The product is also ideal for EGR valve cleaning. The EGR valve must be cleaned when removed.
Dissolves and removes operational dirt in the diesel particulate filter/catalytic converter. Cleaning without dismantling the diesel particulate filter/catalytic converter. Evaporates without leaving any residue
Due to this:
Improved engine performance, noticeable fuel savings, reduction of harmful exhaust gases, avoiding failures of the affected components
Instructions for use:
Important: Motor must be warm in operation Can before use approx. 1 min. Shake vigorously
Disassemble temperature, pressure sensor or access opening on the DPF / catalytic converter and insert the probe via the opening. In intervals of 5 seconds, the cleaner is sprayed into the particulate filter/catalytic converter using a probe until it is completely and evenly moistened with cleaner.
Remove the probe and close the opening again. During application, the deposits are dissolved and distributed in the particulate filter/catalytic converter.
Then initiate regeneration via workshop tester. Check error memory and, if necessary, Delete existing errors. Then a test ride of approx. 20 minutes.
DPF/Kat cleaner 301 can be used with all closed particulate filter systems. Check the oil level before cleaning. For oil dilution by diesel, make sure to change oil.
Technical data:
Use:
One can is sufficient for one application/particulate filter/catalytic converter.
Contents:
400 ml spray
Item number: :
46301