Narrow V-belt with rope cord pull strand, consisting of rubber pad, rubber core and wrapping fabric. Areas of application e.g. mechanical engineering or horticultural equipment as replacement requirements. Classic V-belts can be used universally. Technical data: V-belt description: SPZ 1487 Lw / Lp / Ld - profile: 9.7 x 8 (upper width x height) - nominal length: in working length (Lw) - length outer circumference (Lw): 1487 mm - conversion to the classic outer circumference (La): Lw + mm: 1500 mm - conversion to the classic inner circumference (Li): Lw - mm: 1465 mm - Top width: 9.7 mm - Bottom width: 4.2 mm - Height: 8 mm - Material: neoprene, coated, black - Pull strap: polyester - Standard: DIN 2215 / ISO 4184 - Tolerance range according to DIN: 1% - Recommended Minimum disc diameter: 63 mm. Features: anti-static, oil and heat resistant. Temperature range: -18 °C to +80 °C. Max. Speed 42m/sec Note: these narrow V-belts are not suitable for back tension or pulley and coupling V-belt drives. These conditions meet the so-called clutch straps. For multi-grooved V-belt drives, make sure that all V-belts used are always replaced together and also correspond to the same production batch. A note can be made at the end of the order. If this note remains unnoticed, the V-belt can lead to increased wear or destruction.