Gear coat of glide and joint grease set Gear Flon 16
PartCore offers you the original gear coat 15 ml Ceramic sliding and lubricant by Gear Flon. Youll be able to lubricant even measuring and be positioned individually on the intended purpose.
Ball bearings and heads, gear wheels, valves, gears, joints etc, its a jungle out there, but the addition of gear coat mixing Select the viscosity. For ball bearings, we recommend a thin solution, for example.
Gear coat is free from resin, acid, oil, grease, silicone and conventional lubricants not comparable. It is a dry white lubricating layer with extreme
Running properties. Micro-fine Ceramic particles and additives move in a secure alcoholic solution with excellent penetration properties and therefore also reach hard to reach places. After evaporate the solution Smooth particles smallest imperfections in the surface of metal, plastic and other materials, the in model building use.
The Sure degreasing and apply sparingly before use. If you are really too much once applied, this can e.g. for more ball bearing a heavy play. This gear coat mixing provides a solution and also removes dried the already dry white layer, but at no Fully dissolving. First Not Nachschmieren. The time intervals between Nachbehandlungen * * * According to the tear. The existing layer is not completely solved.
The dry layer works in a temperature range from -40 to + 980 °C
The middle has no Rostlösende.
Functions
· Less Friction and wear
· Excellent Running properties – No dust binding between
· Theres a dry Slide coating comparable with long time lubrication
Box Contents
Gear coat 20 ml, mixing 50 ml, dispensing needle