Feature(may vary by option.)
●Package contents: 48 mm Forstner drill bit for woodworking, use with bench drills, vertical drills, CNC routers. Drilling diameter < 40 mm, speed (maximum): 2000 rpm; drilling diameter ≥ 40 mm, speed (maximum): 1200 rpm.
●2. Material - Heat treated tungsten carbide tip, sharp edge, burr-free, high hardness, impact resistance, smooth cut, wear-resistant, durable and long service life.
●3. Application - Suitable for drilling wooden furniture. For cutting wood, plywood, solid wood panels. For cutting out flat bottom holes, pocket holes and overlaps. Easily enlarge existing holes and drill any arc of circle. The drill is intended for general use.
●4. Design - The curved head facilitates chip removal, allows higher perforation performance and is ideal for drilling concealed hinges and door locks. The three sharp taper cutters guarantee repeatable, clean and accurate drilling. The centring mandrel can center precise holes.
●5. Application - For fixed table devices, not for hand-held electrical devices (such as hand drills, electric drills). Only for processing wood or soft non-metallic materials. Before drilling, make sure that there are no nails or other metal objects on the wood.
[28mm]
[60mm]
[75mm]
[55mm]
[48mm]
Description
Use:
Suitable for drilling wooden furniture. For cutting wood, plywood, solid wood panels. For cutting out flat bottom holes, pocket holes and overlaps. Easily enlarge existing holes and drill any arc of circle. The drill is intended for general use.
About this product:
- Heat treated tungsten carbide tip, sharp edge, burr-free, high hardness, impact resistance, smooth cut, wear-resistant, durable and long service life.
- Curved design head, easier chip removal, higher perforation efficiency, good for drilling concealed hinges and door locks.
- Three sharp spurs ensure repeatable, clean and precise drilling. The centring spur can accurately centre holes.
- Solid hardened steel shank for use with bench drills, vertical drills, CNC routers. Drill Diameter
Specifications:
Bore diameter: 48 mm / 1.89 inches.
Bore depth: 50 mm / 1.97 inches.
Hexagonal shaft size: 10 mm / 0.39 inches.
Total length: 80 mm / 3.15 inches.
Material: tungsten carbide, 45# carbon steel.
Package:1 pack of forster drill bits
Tips:
- For benchtop appliances, not for hand-held power tools (such as hand drills, electric drills). Drilling materials must be fixed and the drill should be perpendicular to the materials.
- Only suitable for processing wood or soft non-metallic materials. Before drilling, make sure there are no nails or other metal objects on the wood. The cutting edge and tip of the drill should be sharpened in time.
- When drilling solid wood or other sturdy materials, water should be injected to improve quality and precision and extend the life of the tool.