Feature

●Suitable for Stema OPTI 750, 850
●FT series: FT 7.5-20-10.1B, FT 8.5-20-10.1B
●Not suitable for the type B700/750 & uploader HL750.
●Not suitable for models with 10 inch tyres
●This set contains: 2 brackets and mounting kit
●Very stable and durable design made from galvanised sheet steel


Description

Clamp mount for trailer supports suitable for Stema OPTI 750, 850 FT series: FT 7.5-20-10.1B, FT 8.5-20-10.1B. Box contents: 2 brackets including screw set, very stable and durable design made of galvanised sheet steel. Description:

With many Stema 750/850 kg trailers, these brackets are required for attaching clamp brackets for support supports at the back of the trailer.
The side holes on the frame are already present, the holder only needs to be attached here and additionally screwed to the base plate.

Holder details:

• Material: sheet steel.
• Surface: galvanised
• Material thickness: 3.1 mm.
• Length: approx. 225 mm.
• Width: approx. 65 mm.
• Height: approx. 100 mm.
• Distance between the holes for frame mounting: approx. 195 mm, diameter 10.5 mm.
• Distance between the holes for clamp holder: approx. 105 mm, diameter 10.5 mm.

Details screw set:

• 8 x screws M10 x 30.
• 8 x self-locking nut M10.
• 2 x round head screws M8 x 30.
• 2 x self-locking nut M8.

Notes:

For some Stema trailers, which are distributed through the company "Bauhaus", may need to additional spacer sleeves. If in doubt, you need to measure the distance from the frame to the side panel, this should be a maximum of 10 cm. (Please check before purchase)
Not suitable for the type B700/750 & uploader HL750.