Specification:
Name: 1500W Step-Up Constant Current Module
Type: Non-Isolated Upward Module (BOOST)
Input voltage: DC 10 V to 60 V.
Input current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A
Quiescent current: 15mA (when converting 12V to 20V, higher output voltage increases quiescent current)
Output voltage: 12-97 V infinitely adjustable (cannot be used to reduce the voltage).
Output current: 22A (based on the input and output voltage difference: the greater the voltage difference, the lower the output current. Please increase heat dissipation if the current is above 15A.)
Constant Current Range: 0.8-22A (+/-0.3A)
Reverse Polarity Protection: Yes (150A Power MOS Reverse Polarity Protection)
Input Low Voltage Protection: Yes (10V-50V Adjustable, Self-Recovery)
Operating temperature: -40℃ to 85℃ (if the temperature is too high, please improve heat dissipation)
Frequency: 150 kHz.
Conversion efficiency: 92% to 97% (The efficiency depends on the input/output voltage, current and voltage difference. The smaller the difference, the higher the efficiency.)
Input over current protection: yes (automatic protection when the input is more than 40A and the supply voltage does not increase)
Short circuit protection: Yes (input fuse 60A) Please proceed carefully and try)
Reverse input protection: yes (150A power MOS tube, can be connected reverse for long time)
Installation method: Four 3mm standoffs
Wiring method: terminal blocks (Please use copper wire with large current)
Output power: Maximum output power = input voltage * 30 A.
Weight: approx. 372g
Package list:
1 x module.