[White]
Etepon watch repair kit (latest version) is a professional set for both experienced watchmakers and novices. It is easy to use and the ideal kit with different tools to meet your professional and general repair requirements.
What is the difference between the ETEPON watch tool set?
Case opener with maximum elasticity of 55 mm.
It is a larger with a larger opening range of 20 ~ 55 mm. Some small case openers only have a opening range of 20mm to 37mm which is not suitable for mens watches.
Closing machine (pressing tool).
The watch closure machine comes with 12 stamps that allow 50/48 mm, 46/44 mm, 42/40 mm, 38/36 mm, 34/33 mm, 32/31 mm, 30/28 mm, 26/24 mm, 23/21 mm, 20/18 mm.
How to use watch closing machine (For the snap watch fall back)
1. First choose a stamp that is larger than the watch, and place it on the bottom screw of the pliers.
2. Choose a matrix slightly smaller than the back cover of the watch and attach the top end of the pliers.
3. Place the watch face down on the press at the bottom of the mouth and place the back cover in the correct position.
4. Slightly press the pliers to close the rear cover.
5. When the watch is pressed, place the tablecloth on the pad to protect your watch!
Our kit can help you solve the most common problems with your watch. For example, removing the watch case, adjusting the watch strap, replacing the buckle, replacing the watch battery and the like.
► If you buy our watch tool, you can save more than you buy separately.
► Portable compact carry bag makes it easy to carry.
The cleaning cloth can clean your watch and protect it better.
1. This watch push tool is very useful for closing snap-watches and installing flat mineral glass crystals.
2. With the watch press, you can close the buckle on the watch back, attach the bezel rings and change the battery.
3. These exclusive straight nylon stockings will not scratch or damage crystals.
4. The press is made from a cast iron metal frame and can be mounted on a bench for stability.
|
|
|
|
---|---|---|---|
Pliers.Help to adjust watch straps |
V Head Flat Head Spring Bar ToolRemove the spring bar of the strap, assemble the strap/buckle together/disassemble and measure the diameter of the case back. |
Yellow clock lever knife opener.Open the snap lid. |
Strap holder + hammer + pin punch.Remove / adjust the strap, close the buckle. |
|
|
|
|
---|---|---|---|
TweezersWith the tweezers, you can pick up small parts of a watch or watchmaker tools such as screws, hands, battery etc. |
Case holder + adjustable case back opener.Open the waterproof case back from 20 to 55 mm. |
Needle pliers.1. Professional pen removal tool Can be used for easy removal of pens 2. When you do this, you should put 2 pieces of smooth paper on the dial to avoid scratching. |
3 x screwdriver.1. Standard flat head screwdriver, simple and practical. Colour coded hats quickly distinguish sizes. 2. Perfect for watch repair, watch battery change, remove watch strap screw connections, eye glass repair and jewellery. |