Feature

●Size – bottom hole diameter: 3 mm/0.12 inches; total length: 25 mm/0.98 inches; bottom total length: 6 mm/0.24 inches.
●Material - Straight umbrella tail beads are made of PP plastic, it is odourless and tasteless. The density is very low and it is one of the lightest varieties of all plastics; in addition, PP plastic with a water absorption of only 0.01% is particularly water resistant, so you can easily hold an umbrella even in heavy rain.
●Use - When replacing the umbrella beads, first pull out the bad umbrella beads from the umbrella bone and remove them. Then sew new umbrella beads according to the pattern on the original umbrella fabric. When sewing, make sure to sew in the reverse direction and use the umbrella upside down. Finally, insert the umbrella bone again.
●Application - It happens that the umbrella in the house is not damaged as a whole, but that the core of the umbrella is broken, which means that the umbrella surface does not find hold and the use is affected. Currently, you only need to buy the accessories for the umbrella and sew it according to the above procedure so that you can use it normally.
●Note - Contains 10 umbrella beads. Can be used for all replacement beads for an extra large umbrella with 10 bones. You should first measure the opening at the bottom of the umbrella rib and compare with the corresponding size of the umbrella bead. If you have any questions, please contact us.


Description

Straight umbrella tail beads are made of PP plastic, it is odourless and tasteless. The density is very low and it is one of the lightest varieties of all plastics; in addition, PP plastic with a water absorption of only 0.01% is particularly water resistant, so you can easily hold an umbrella even in heavy rain.

It happens that the umbrella in the house is not damaged as a whole, but that the core of the umbrella is broken, which means that the umbrella surface does not find hold and the use is affected. Currently, you only need to buy the accessories for the umbrella and sew it according to the above procedure so that you can use it normally. This umbrella accessory is suitable for long handled umbrellas and straight umbrellas.

When replacing the umbrella beads, first pull out the bad umbrella beads from the umbrella bone and take them off. Then sew new umbrella beads according to the pattern on the original umbrella fabric. When sewing, make sure to sew in the reverse direction and use the umbrella upside down. Finally, insert the umbrella bone again.

Contains 10 umbrella beads. Suitable for replacing all beads for an extra large umbrella with 10 bones. It is useful to measure the opening at the bottom of the umbrella first and compare the appropriate size of the umbrella bead. If you have any questions, please contact us.