Mounting kit with gear sprinkler Rain Bird 5004 for 32 mm PE piping. Plug & Rain Eco standard quality. Do you have a large lawn area and need a powerful sprinkler to irrigate it? Here you are right with a Rain Bird gear sprinkler. Thanks to the large casting distances, even wide areas can be easily irrigated from the edge and no additional sprinkler needs to be installed in the middle of the lawn. This saves installation costs and simplifies the construction of your irrigation system without sacrificing watering performance. The throwing distance and the amount of rainfall of the sprinkler is adjusted by inserting the appropriate nozzle. For this purpose, a standard nozzle set is included as an optional MPR nozzles for the sprinkler are available as accessories. The sector can be easily adjusted by means of an adjustment screw on the sprinkler head from 50° to 360°. The Plug&Rain Eco gear sprinkler mounting kit includes a functionally ready Rain Bird gear sprinkler and all necessary parts to integrate it into your 24 mm supply line using a T-piece. The Plug&Rain Eco mounting kit with the Rain Bird 5004 gear sprinkler is delivered in individual parts, unlike our Expert and Premium variants. To adjust the gear sprinkler, the adjustment key ZR-177_ROTORTOOL_Y05100 is required, which is not included in the Plug&Rain Eco set. Included in the set: Rain Bird 5004 gear sprinkler with 10 cm riser - nozzle set with 8 standard nozzles - T-piece with two 32 mm screws and 1/2 inch internal thread - 2 pieces transition angle to flex pipe (16 mm) - 1 metre DVS irrigation flex pipe (16 mm) technical data: installation dimensions gearbox. Diameter: 7 cm, height: 22 cm, exposed dimensions, riser approx. Diameter: 4.5 cm