Feature

●High quality: ordinary double ear clamps are made of high-strength seamless tubes, and the thickness is designed according to the standard maximum air pressure requirements, so that this type of clamp has a strong clamping force and pressure resistance.
●Sizes: The clips for hose fuel contain a total of 7 commonly used sizes 5-7 mm, 7-9 mm, 9-11 mm, 11-13 mm, 13-15 mm, 14-17 mm, 15-18 mm, 17-20 mm, 20 - 23 mm, can meet most daily needs.
●Use: Place the spring band clips on the end of the hose or pipe to be connected to protect the hose from squeezing. It should be noted that if the galvanized layer is damaged, there will be small surface cracks during tensioning, which is acceptable.
●Easy to use: use a special pliers tool to close each ear at the base of the ear. Pressure resistant, corrosion resistant. Wide adjustable range, torsion-resistant, durable.
●Wide range of applications: 2-ear hose clamp set is perfect for industrial, electronic and automotive applications or home use, also suitable for clamping silicone or rubber hoses for fuel, hydraulic hose fuel, petrol hose clamp, etc. on cars.


Description

Product description:
--These hose clamps are the perfect clip for use with silicone or rubber hoses for fuel lines, air lines or other types of hoses that need to be clamped.
--This hose clamp set has sealing pressure constance, for sealing hoses against liquid, air or gas loss.

Features:
1. These ear clips are made of a stainless steel band into which 2 ears are moulded.
2. Each ear should be closed with special pliers at the base of the ear.
3. It permanently deforms, pulls the band and causes the tape to tighten around the hose.
4. Perfect for clamping silicone or rubber hoses of fuel, gasoline etc to cars.

Specifications:
Material: Iron
Surface finish: zinc plating.
Box contents:
5-7 mm, 20 pieces.
7-9 mm, 20 pieces.
9-11 mm, 20 pieces.
11-13 mm, 20 pieces.
13-15 mm, 20 pieces.
14-17 mm, 20 pieces.
15-18 mm, 20 pieces.
17-20 mm, 15 pieces.
20-23 mm, 5 pieces.

Notes:
--The size of the clamp refers to the inner dimension (ID) of the clamp.
--Please allow 1-3 mm error due to manual measurement. Thank you for your understanding.
--Monitors are calibrated differently, the colour of the item shown in the photos may differ slightly from the real object. Please take the real one as standard.