Feature(may vary by option.)
●High quality stainless steel suction hose and pressure hose with braid 1.4301,
●Reinforced hose as Suction Hose e.g. for Pumpa layers, suction pump/Fountain pumps, etc.
●Inside Stainless Steel Spiral Guards against the hose in Suction operation,
●DN32, 11/4 inch x 11/4 AG, temperature from -20 °C to 90 °C; Operating Pressure 6 bar,
●Length 30 cm, industrial quality made in Germany – Made in Germany, up to 100 cm
[50cm]
Description
You receive direct from the manufacturer a high quality reinforced hose made in Germany for pump systems with internal stainless steel spiral.
Working mode:
In the inner hose is a spiral made of stainless steel rings. This stainless steel spiral support The Inner Tube in high Saugd back and prevents contract, or might have them into inner hose. So your child can suction hose suitable for e.g. for wells pumps, etc.
The hose is non-corroding and with quality braid made from 1.4301 stainless steel (AISI 304). The ideal reinforced hose for suction pump operation, even under tough conditions.
Installation to fish, flexible connection hose in the nominal width DN32 1 1/4 (also available in DN25 1 inch)
Do not compare our products with cheaper imported, available in our, everything is Made in Germany.
On request you can a special Available in other lengths and with other connections or also available as a ready stainless steel corrugated pipes.
Connector (S): 1 1/4 inch x External thread 1 1/4 inch (Dichtfl surface to Dichtfl surface) Length: 30 – 100 cm (see selection chart above) Nominal width: DN32 ID: 32 mm, ad: 42 mm) Directions for use: As a suction hose, e.g. for Pumpa layer Numflechtung: Stainless Steel 1.4301presshülsen: Aluminium Hose: EPDM designed with an integral stainless steel spiral fittings: brass Inside Vernickeltbetriebsdruck: 6 Bartemperatur: -20 °C to 90 ° Cliefer Contents: Ready to mount, including 1x gasket for cap nut
The hose length from Dichtfl surface to Dichtfl surface to the next level.
Dimensions and functional Dimensions: