Feature

●Universal and efficient – the rotary switch is primarily responsible for conducting current under rated conditions and in case of overload, short circuit or other unpleasant failures, but only for a certain period of time
●Important element of electrical installation – the electrical plug disconnects the circuit even under rated and overload conditions, if something dangerous can occur
●High-quality insulator – made by specialists with the selection of the best materials. Its quality is to ensure safe insulation of the circuit in the electrical installation, so you do not have to worry about the dangers associated with working when operating devices and networks;
●Fulfils its job - 3-pin load disconnectors are used to separate phases and disconnect the power supply for specific, selected parts of the power grid;
●Protection class IP 20: the product has a protection class IP 20, which proves its dust resistance and thanks to which the device can withstand a very long service life


Description

The load disconnector is primarily intended for the power line under overload and rated conditions, as well as for short circuits or various other errors. Please note that the switch only does this for a certain period of time.

The switch also works well when disconnecting the circuit under rated or overload conditions, ensuring constant monitoring of the safety of the electrical installation. However, the applications of this switch do not end there.

The next task is to isolate the circuit and thus ensure the cheapest way of working with an emphasis on safety when handling electrical equipment and electronic networks.

3-pin switch-disconnectors are used to disconnect phases and disconnect the power supply for certain parts of the system.

Technical data:

Rated current: 32 A DC.

Rated voltage Ui: 1200 V DC.

Working temperature: -40 ~ +85 degrees. C.

Surge voltage Uimp: = 8 kV.

Protection class: IP20.

As main switch: yes.

Rated continuous current: 32A

Suitable for installation in distributor: yes.

As service separation: Yes

Number of poles: 4.

Type of switching element: button.

Protection class (IP) of the front part: IP20.

Complies with IEC / EN 60947-3 standard.

It is the 40th C = 16A

It is the 60th C = 13A.