![DE](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Installation and usage method:
The controller has 6 lines, the red line is the main line of the motor, the green and the white are the secondary lines of the condenser, the two blue lines are the speed return line and the yellow line is the ground line.
Turn off the power supply, connect it according to the wiring diagram and confirm that the line connection is correct, do not change it arbitrarilly; set the external speed controller to "0" before use to avoid high transient currents and damage the control. This product is controlled by the reverse voltage of the generator and the control line is divided into two wires: "blue" and "blu".If the controller is connected to the motor and determines that the torque or speed does not meet the requirements, the US-52 adjusts the side trimmer potentiometer (setting of the speed setting). To change the engine direction of the engine, simply replace the jumper "CCW" and "CW" on the wiring on the back of the controller. The action switch only controls the running or stop of the engine and The power supply is not used Interruption. If it is not used for a long time, please turn off the device.
When you change the direction, you need to change the engine after it has completely stopped working.1) Select COM and CW short circuit, then the motor turns clockwise; 2) Select COM and CCW for short circuit, then the motor turns counterclockwise.