Feature

●WIDELY APPLICATION It is very simple: just plug it in for testing. It can also be used for testing different types of triodes, thyristors, MOSFETs. Allows analysis of the device type, polarity of the pin, output HFE, valve voltage and barrier layer capacity of the FET.
●Automatic Identification Intelligent transistor tester automatically detects NPN and PNP transistors, N and P channel MOSFETs, diodes, thyristors, resistors, capacitors or other devices.
●Typical ESR value table: on the back there is a table "typical ESR value of electrolytic capacitors", it is for guidance only, these are typical values for standard electrolytic capacitors at room temperature.
●Easy Application Our advanced electronic transistor tester has an automatic shut-off function. Automatic shut-off 20 seconds after measurement. Large LCD display with backlight for easy reading.
●Note: discharge the capacitor before testing, otherwise the internal circuit may be damaged. Powered by 1 x 9V 6LR61 battery, if the battery power is below 6V, please replace it with a new one. When using DC power supply, please choose a DC 9V-12V adapter (including 9V and 12V).


Description

Product Features:
- One button operation, boot test, easy access button.
- Automatically test pen elements and display pen elements on LCD display.
- Automatic detection of NPN, PNP bipolar transistors, N and P channel MOS field effect transistors, junction layer FETs, diodes, diodes, thyristors, unidirectional and bidirectional low-power thyristors.
- Automatic detection of pin assignment.
- Bipolar transistor current gain factor and base emitter threshold voltage measurement.
- Identify the LCD transistor by base emitter threshold voltage and high current gain factor.
- Gate MOSFET threshold voltage and gate capacitance measurement.
- Two resistors and resistance symbols can be measured simultaneously. A decimal value of 4 is displayed on the right. Both sides of the resistance symbol indicate the number of pins.
- Can measure the blocking capacity of a single diode. When the bipolar transistor is connected to the collector and emitter of the base and pin, the blocking capacity of the collector or emitter junction can be measured.

Product details:
- Resistance: 0-50MΩ; Resolution: 0.01Ω
- Capacitor: 25 pF - 100 mF; Resolution: 1 pF.
- Inductor: 0.01mH - 20H; Resolution: 0.01mH
- Capacitor ESR: 2uF - 50mF; Resolution: 0.01Ω
- Power supply: 1 x 9V 6LR61 (not included)
Size: 14.0 x 8.2 x 4.6 cm.
- Weight: 223g

Package includes:
1 x Digital Transistor Tester
1 x Test Tweezers
1 x user manual (English language not guaranteed). English language not guaranteed).

Notes:
Discharge the capacitor before testing it, otherwise the internal circuit may be damaged.
- When using DC power supply, please choose a DC 9V-12V adapter (including 9V and 12V).
- Powered by 1 x 9V 6LR61 battery (not included), if the battery is below 6V, please replace it with a new one.