Feature

●Mutual inductance current monitoring has high accuracy of current detection and safe separation of input and output. Self-powered, no external power supply required.
●Easy to install and use, no need to connect DC into the circuit when you measure. Measured current AC 0-10 / 20 / 50A, output signal DC 0-10V.
●The outer casing is made of self-extinguishing ABS material.
●Suitable for measuring and monitoring the AC current, overload protection of the AC motor, the electronic switch of automatic control and so on.
●Design with continuous structure, insulation strength up to 2000V. The hysteresis is less than 1% and can be used under strong magnetic conditions.


Description

Specification:
Model: SZT15-CH-10V.
Supply Voltage:Not RequiredOutput Type:0-10V DC
Input continuity current: AC 0-10A / 20A / 50A.
Duty minimum: 0.5 ± 0.2 A.
Maximum overload of the forward current: 200%.
Accuracy: ± 1%.
Power consumption: 1 W.
Leakage current: 1 mA.
Hysteresis: 1%.
Linearity: 10%-100%.
Straight cable diameter: 0.35 to 20 mm.
Response time: 200ms.
Dielectric strength: 2000VAC 50/60Hz 1min.
Working environment: -20 ~ 60, 5-95% RH.
Dimensions: 61.5 x 90 x 26 mm / 2.4 x 3.5 x 1.0 inches.
Hole diameter: 20 mmPackage weight: approx. 107 g / 3.8 oz.

Package list:
1 x AC transmitter.

Note:
1. Due to the difference between monitors and light effects, the pictures may not reflect the actual colour of the item.
2. Please allow slight errors due to manual measurement. Thank you for your understanding.