Feature
●Extreme temperatures lead to poor adhesive performance: Only apply this seal when the air and surface temperature is between 13 °C and 40 °C. If you use 7 °C - 12 °C (45 ° -54 °F), you can use a hair dryer and heat the tape and the surface of the 15 cm section at the same time.
●Z-shaped design, more durable and flexible. Noise reduction, waterproof, dustproof and soundproof as well as windproof. High temperature resistance and cold resistance prevent ultraviolet light. If you think that the sealing adhesive is not sticky enough, you can purchase a professional bonding agent separately for better results.
●An improved weather protection strip for universal truck seals: which replaces other strips of type D, P, Z and O. Easy to install and high strength weatherproof adhesive seal. Easy to install tool. Direct replacement strap. You just need to press the stripping foam onto the rubber sealant above the installed place.
●This sealing strip improves the tightness of your car: which closes the door tighter. Reduce wind noise when driving your car at high speed. Take a nice trip with your family. Make your car more sealed so you can keep your car away from dust, raindrops and fog. Sound insulation best waterproof.
●High-quality sealing strip: it will close the gap between the car door, body, bonnet, bed rail, etc. Improve driving comfort while driving on the highway. Excellent soundproofing resistance for maximum life and vibration absorption.
Description
Automotive Gasket Advantages:
1. The voice is stable and heavy when changing the car door, optimises the door collision, collide sound when the car door is closed.
2. Improve vehicle airtightness and dustproof capabilities.
3. Optimising engine compartment cool air flow.
4. Improve air conditioning cooling and heating performance, in part reduces fuel consumption.
|
|
|
|
|---|---|---|
Features:Total length: 4 m. Shape: Z shape. Material: EPDM rubber. Suitable models: Universal. Size: 4000 x 23 x 5 mm (L x W x H). |
Premium material:The rubber strip is measured at 4 m length. It is made of rubber for flexible, waterproof and good heat and cold resistance. |
Noise reduction:The rubber seal strip improves the tightness of the door, sound insulation and noise reduction, optimize the cooling air flow of the engine compartment, dramatically reduce the wind noise caused by entering the cabin and other outside noise. |
Installation:
1. Clean the place where the car seal will stick.
2. Tear off the protective film on the back of the sealing strip, stick it exactly to the position of the door frame and press on it.
3. Check that all pastes are present. Please press the seal again after 5 minutes.
4. You need to open the door for 20 minutes and then close the door for 3-5 hours.
5. Please do not pull the seal after sticking and do not wash the car within 3 days. Do not open and close the door several times within 24 hours of installation.