Feature

●This automatic compressed air condensate drain is considerably different from the conventional mechanical automatic drain that belongs to the continuous drip drain
●The shell is made of cast aluminium alloy with a corrosion-resistant surface made of plastic powder coating
●The automatic draining board is extremely reliable in operation, no electricity required, no noise, no compressed air loss
●The drain has a large drain that is not easy to clog. It is a new generation and a wide range of compressed air release devices
●This is a fairly stable drain that has great performance and low failure rate


Description

Description:
This automatic compressed air condensate drain is mechanically automatic draining board with cast aluminum shell and inside float ball drainage system. The drain is closed when drained. The buoyancy is smaller than the weight of the floating ball plus compressed air pressure; and it opens as the buoyancy increases to drain condensed liquid.


Technical data:
Model: HAD20B
Port size: inlet = outlet = 1/2BSP.
Max. Pressure: 20 bar.
Max. Temperature: 100°C.
Max. Capacity: 400 l/h
Weight: approx. 602 g


Instructions:
Before installing this drain, use compressed air to remove impurities in the pipe until it is completely clean.
Install this otherwise automatic drainage under the drainage device of the device condensate is filled and affects drainage.
Maintenance
Check the drain once a week.
Operation method: open the manual drain valve to drain the water until compressed air enters appliances enter the drain after a few seconds and then close the valve drained water is more than 0.5 liters, there is a blockage and a drain need to be completely cleaned.
Inner parts should be removed and cleaned every year. When cleaning, you can use soapy water or dishes. Do not use solvents to clean so as not to damage the rubber. Fittings.


Package includes:
1 x drain valve.
1 x pipe fitting.