Feature

●BTS7960 43A Dual H-Bridge Stepper Motor Drive Current Limiting Semiconductor Cooling
●5V insulation with MCU, effectively protect the MCU; 5V power indicator on board. Voltage indicator at the output end of the motor driver, can solder the heat sink.
●You only need four wires from the MCU to the driver module (GND. 5 V PWM1 PWM2); insulation chip 5 V power supply (can be shared with MCU 5 V)
●Can rotate the motor forward and backward, two PWM input frequencies up to 25 kHz; two heat currents supplied via a fault signal output.
●Isolated chip 5V power supply (can be shared with the MCU 5V), can also be the built-in 5V supply, the supply voltage is 5.5V to 27V.


Description

Description: This driver uses Infineon chips BTS7960 made of high performance drive full driver module with thermal overcurrent protection. Double BTS7960 H-bridge driver circuit, with a strong drive and brakes, effective insulation of the microcontroller and motorist! High Current 43A Electrical Power: Model: IBT-2 Input Voltage: 6V-27V Maximum Current: 43A. Input Power: 3.3-5V. Control: PWM or Level Duty Cycle: 0-100% Input Connection: 1. RPWM: forward level or PWM signal input, active high. 2. LPWM: reverse level or PWM signal input, active high. 3. R_DE: Activate forward drive, high level, low level off. 4. L_DE: Reverse drive allows input, high level activable, low level off 5. R_IS: forward running current alarm output 6.L_IS: reverse alarm output 7.VCC: +5V output, 5V power supply connection with the microcontroller 8.GND: signal common low end Package includes: 2 x BTS7960 43A high performance motor driver module/smart car driver module.