Feature

●High-quality material: made of high-quality zinc alloy material, the KFL08 flange bearing guarantees robustness, wear resistance, and durability. With rubber sealing rings on both sides, it has a good dust and waterproof effect and is suitable for bad working environments.
●Easy to install: the contact surface is smooth and flat, and the model number is engraved below. The locking screw for attaching the main shaft is used to lock the shaft and the bearing. Thanks to the two-screw housing and the ball bearing insert, it makes mounting easier and guarantees quality.
●Adjustable: Self-alignment function: the KFL08 bearing block has a high-strength rolling body inside, which has a good load capacity. Fine tuning can be made between the inner bearing and the outer mounting ring, resulting in a smooth, low-friction and hard ride.
●Application: This bearing block can facilitate the maintenance and replacement of parts of the 3D printer. KFL08 bearing housing bearings are often used in various machines, especially in food machines. Suitable for aerospace, industrial automation, compressors, machinery, printing machinery, etc.
●Low noise: The KFL08 bearing seat bearing is characterised by high torque and low noise. The speed is stable during operation. Can work with the machine to improve efficiency. It is not easy to get hot and provides the life cycle of the machine.


Description

- Made of high-quality zinc alloy material, the flange bearing guarantees robustness, wear resistance, and durability.
-KFL08 pad bearing has built-in balls that improve the bearing capacity of the bearing seat. The inner ring of the bearing is equipped with a locking screw that allows the shaft and bearing to be locked.
- Fine tuning can be made between the inner bearing and the outer mounting ring angle.

Specifications:
Model: KFL08.
Material: zinc alloy.
Total size: length x width x height: 48 x 28 x 12.5 mm.
Bearing inner diameter: 8 mm.
Mounting hole diameter: 5 mm.
Mounting hole spacing: 36 mm.
Weight: 120 g.

Note:
1. Due to manual measurement, the size may be 1-3 mm error.
2. If there is a problem, it will be sent by customer service within 24 hours for you