Systèmede multi-carrier base / electric motor multi-purpose background pour-mounting wall/ceiling with crossbars of 3.15 m.
Alimentépar alternating current, with a cable length of about 270 cm and cables unetélécommande of 210 cm with three buttons for each barretransversal.
Uneextrémité of the aluminium rod 47 mm diameter (without hole) is inséréedans hole the mounting plate. The opposite end (with a hole) in the plate estinsérée engine suspension and fixed with the nut and the boulonfournis. You can change or adjust the background by rewinding the dumanchon to the tree to secure the edge of the background. Alternatively, you can place the background with its sleeve on the shaft by compensating ladifférence diameter between the shaft and the sleeve with suitable matériauxélastiques (rubber, dense foam, plastic foam, etc.). Cesinserts between the shaft and the roller ensure that they do not turn the tree. The inner diameter of the cylinder is not standardised, there is no other way to compensate for a slip ladifférence tree knife than the use. Or change means to delinstallation wall brackets, do not forget to leave a dégagementsupplémentaire 20 mm along the length of the aluminium rod for permettrelinstallation and removal of the rods.
Cesystème motorised permettantdaccéder you an automated solution multi-background provides easy to use on multiple backgrounds at any time.
Product specifications.
Wheels/Crossbar: 3 rolls of 3.15 m.
Wheel diameter: 28 mm.
AC connection 220.
Motor DC 24 V.
Motor 30 W.
Fuse 2A.
Lestoiles / papers are not included.