The SD card has the characteristics of small size, large capacity, impact and moisture resistance, high temperature resistance, stable performance, permanent and effective data storage, no noise, no error. It is a popular mainstream product memory card. This riser card allows you to connect the SD card with this superiority to the standard ATA IDE interface as a standard IDE storage device.
Features:
1. Compliance with standards: SD specification Ver2.0, IDE / ATA-33 specification;
2. Standard IDE interface: true IDE mode and supports DMA transmission mode 33;
3. The IDE interface is a 44-pin / 2.0 mm male connector.
4. There are two main control chip on this plate, and there is an SD card socket on the back;
5. Advantages: small footprint, compact design and easy operation.
6. The SD card can be included with the operating system and application software, and the device can be activated directly;
7. Supports DMA and Ultra DMA mode for DOS / NT4 / WINDOWS98SE / ME / 2000 / XP / VISTA / MAC / Linux systems.
Specification:
Colour: black.
IDE interface: 44pin
Supports SD card, 8-64 GB.
Support SD memory card type: TF,Micro SD
Size: 51 x 41 x 3 mm / 2.0 x 1.6 x 0.1 inches.
Approximate weight: 9 g.
Package list:
1 x SD to IDE adapter.
Installation Notes:
First install the SD card into the slot, and connect the hard drive data cable to the interface of the notebook hard drive. The power on detection is normal and can be used. It is so simple, no need to make drivers.
Note:
For soft routing, the SD card size is enough to be within 1G. If you install WIN98, Win ME, WINXP or system, the SD card capacity is preferably 2 GB or more. If you need at high speed, please choose a high-power