Package includes:
1 x CS pressure regulator 15 PSI / 1 bar with 1 x CS quick hose piece, 1 x CS Y-regulating valve mounted.
Application:
The normal domestic water connection usually has a water pressure of 3-4 bar. This usually provides too much water volume and water pressure when the tap is turned on normally.
For optimal watering results, we recommend the use of a pressure reducer.
The CS Perl hose requires a maximum operating pressure of 1.5 bar, ideally 0.7 bar.
The CS pressure regulator protects the CS Perl hose from overpressure.
With the CS pressure regulator, the life of your CS Perl hose is extended.
The water release becomes more uniform in your CS Perl hose system.
Operating interference is minimised (water filtration required).
For short irrigation distances below 50 metres per irrigation strand, we recommend installing a flow reduction, which reduces the amount of water flowing in.
For irrigation distances from 50 metres, the flow reduction must be dispensed with as the amount of water flowing in is too low.
Suitable for underground irrigation.
If everything is properly laid and the CS pressure regulator has been adjusted, you now have the certainty that your CS Perl hose system is optimally operated.
Ensure clean watering water. We recommend the use of a water filter.
Ideal as a finished accessory for CS Perl hose offers with quick hose piece.
Disassembly in winter and store frost-proof.
Too high water pressure can damage any CS Perl hose.