Feature

●Model name: CSL – USB 3.2 Gen1 to SATA/IDE converter. Versatile / supports 2.5 inch / 3.5 inch SATA HDD/SSD 2.5 inch / 3.5 inch IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW | up to three drives can be operated simultaneously | ideal for data backup (one touch backup with software) + datarchiving | Quick data synchronisation function at the touch of a button. Also suitable for testing or operating hard drive and burner types on a USB port. 301846
●Connections: 1 x IDE 40 pin + 1 x IDE 44 pin + 1 x USB 3.0 + DC hollow connector + floppy connection | Chipset: IS611 | data transfer speed of up to 5 Gb/s | Power supply: 12 V / 2 A via power supply | supports the reading of SMART value on the SATA port (IDE port not possible). (to monitoring of computer hard drives and to predict hard drive failure) | Supports dual operation (1x SATA + 1x IDE parallel) | for drives with a total capacity of 6TB maximum
●Plug & Play, blue power LED (display of read/write, operation and power status), on/off switch, USB 3.2 Gen1 specification (allows fast data transfer rates), backward compatible with USB 2.0, tool-free quick installation, with DC hollow socket 12 V/2 A (5.5 mm/2.5 mm, inside +/outside). The connection of a network will connect Part for conventional hard drives (3.5 inches), which rely on a 12 V supply voltage
●Operating system compatibility: Microsoft Windows 11, 10, 8.1, 8 (32/64bit), 7 (32/64bit) | No driver installation required | Note: To ensure full functionality, an additional 12V DC power supply (3.5 x 1.35 mm DC plug must be connected to a conventional 3.5 inch (88.9 mm) hard drive. included) included) to the adapter connected to . No driver installation required
●Length of USB connection cable: 60 cm | dimensions: 74 x 100 x 18 mm | weight: 57g (device only) / 330 g (including packaging) | colour: black | box contents: Aplic USB 3.2 Gen1 to SATA/IDE converter + DC power supply 12 V/2 A (5.5 mm/2.5 mm) + 80 cm USB connection. skabel + Molex to floppy adapter cable + software CD (for presets of backup button function) + quick start guide

Description

Secure and reliable external connection of drives via USB interfaces.

In order to run disassembled hard drives on a computer, hard drives must be built into the PC internally. The Aplic USB 3.0 to SATA/IDE converter, on the other hand, allows a simple and uncomplicated connection of external drives to the USB 3.0 port of your PC or notebook - without having to install the drive into a housing first. The converter converts any IDE, SATA or SATA SSD into an external USB drive.

The Aplic USB 3.0 to SATA/IDE converter is ideal for data backup (videos, pictures, music, documents, etc.) or for testing hard drives and drives. For example, create a backup (backup), copy or archive your most important data to your PC. This can be particularly beneficial if you want to read data from an old internal hard drive on a new PC system or want to restore data from a defective external hard drive. You can also use the versatile USB 3.0 to SATA/IDE converter for testing or operating hard drive and burner types on a USB 3.0 port.

With the adapter, it is also possible to operate a SATA drive and IDE drive on the computer at the same time. Thanks to USB 3.0 specification, high data transfer rates of up to 5Gb/s can be achieved. This is 10x faster than USB 2.0 and especially beneficial when transferring large amounts of data. The built-in on/off switch on the power supply protects your connected hard drives when not needed, which has a particularly good effect on the energy efficiency of the device.

Product information