Description
Accompanied by even vibration and sound, this baby cradle control can let your baby fall asleep in a warm and comfortable hug. This will not only improve your childs sleep, but also relieve the mothers hands. The simple layout of the control panel and the sophisticated timer function make it easier to use.
Assembly
Step 1: First, determine the total weight (baby + cradle + baby blanket). Each spring can be loaded with 2.7 kg, there are 7 springs in total, and the maximum load is 19 kg/41.88 lbs. The total weight must match the number of springs.
Step 2: Install the springs. Install the springs in the small holes at both ends, and hang the motor and tripod down. Note: When hanging the spring, pay attention to the balance between left and right.
Step 3: Hang the cradle on a rack or plate with the hook, turn on the power and turn it on. The speed is adjusted to the appropriate speed according to the vibration amplitude. The bottom of the cradle is about 60 cm / 23.62 inches from the ground.
Specification
Model: RF-289.
Material: plastic, iron.
Colour: green.
Timing range: 60/120/180/240 min.
Max. Load capacity: 19 kg/41.88 lbs.
Load capacity per spring: 2.7 kg/5.95 lbs.
Gross weight: 1.4 kg/3.08 lbs.
Package size: 25*13*13cm/9.84*5.11*5.11in
Product size: 18*8*8cm/7.09*3.15*3.15in
Package includes:
1 x baby cradle controller.
1 x power cable.
7 x feathers.
2 x triangular iron.
3 x S-shaped hooks.
1 x rope.
1 x Chinese and English instructions.
Notes:
1) Do not tilt or pull the tensioner when attaching the rope.
2. The spring must be reinforced when the weight of the baby exceeds the weight that the spring can carry.